How to ensure the stable performance of printer toner?

When adding toner, we need to pay attention to a few points. First, the box should not be overfilled, otherwise it will affect the printing power of the printer. Be careful when removing the cover. If you find that it cannot be opened, do not use brute force to turn it over. Open, it is very easy to cause damage to the printer components, and it is difficult to repair after the damage.

In addition, when adding toner, you should add it slowly. The toner will easily pollute the surrounding environment and easily stain your clothes. After the toner is added, we seal the toner cartridge, then put it back in its original position, and follow the previous steps to gradually restore it to its original state, and put the box back into the printer. If it is not fixed, it will also affect the operation of the printer itself.
After the toner is ready, we turn the printer off and disconnect the power supply to ensure our own safety. Then, after confirming that the power supply is disconnected, open the front cover of the printer, press a small button under the front cover, and take out the toner cartridge at one time. You need to press the small switch for the parts taken out. It is located at the left end of the front. After pressing down, the main part of the toner cartridge can be separated from the toner cartridge slot.

The printer toner is mainly used in laser printers. In order to improve the economic efficiency and utilization rate, the printer must add toner. Many toner cartridges can be used continuously after the toner is used up by the user, so there are also independent toners sold on the market. By adding toner by yourself, the cost is reduced. Because the toner cartridge is a sealed disposable consumable, adding toner by yourself will damage the sealing performance of the toner cartridge and cause powder leakage. The particles of toner are generally measured in microns, which are invisible to the naked eye, and the toner is scattered into the air. It will pollute the use environment and office environment, resulting in an increase in PM2.5.


Post time: Apr-25-2022